Carbon offsetting is the compensation of CO₂ emissions by equivalent savings elsewhere. Carbon offsetting projects may include the installation of energy saving devices in developing countries, the investment in renewable energy schemes such as wind farms or “carbon bank” tree planting schemes.
The first site in Wales to be accredited to the
acres of land
trees planted since 2009
tonnes of CO₂ when the forest reaches maturity
The Thorlux commitment
Thorlux Lighting is committed to minimising the environmental impact of both its manufacturing processes and its products. However, even with the most responsible approach, some carbon dioxide (CO₂) will be released into the atmosphere as an indirect result of factory and selling activities and customers’ use of luminaires. In 2009 Thorlux designed an ambitious carbon offsetting scheme to help compensate for these emissions.
A total site capacity of
Capable of offsetting
tonnes of CO₂
What is carbon offsetting?
Minimising the environmental impact
Thorlux has worked hard to develop and implement a truly effective environmental management system and is proud to have achieved ISO14001 certification. ISO14001 confirms that a management system meets the highest of international environmental standards.
One major global environmental impact is the burning of fossil fuels. Most UK power stations consume fossil fuels releasing greenhouse gases such as carbon dioxide (CO₂) into the atmosphere. CO₂ is seen as the largest contributor to climate change.
Thorlux, therefore, aims to minimise energy consumption associated with its products, both directly during manufacturing and selling activities and indirectly via the users of its products (lighting accounts for 20% of the energy consumed globally). By continuing to design and manufacture luminaires that are as optically and energy efficient as possible, fewer luminaires are required on a lighting scheme and power consumption is reduced. Thorlux luminaires use energy efficient control gear, lamps and LED circuits. Electronic control systems can further reduce energy consumption by reducing output in response to the presence of natural daylight or by turning lighting off due to a lack of presence. Use of the Thorlux Smart System or the Thorlux ECO-Range can show significant energy savings of up to 70% compared to a similar uncontrolled lighting system.
What is a carbon footprint?
The carbon footprint is a measure of the amount of CO₂ and other greenhouse gases emitted by a human activity or accumulated over the full life cycle of a product or service. A manufacturing process or lighting installation will always have a carbon footprint.
Thorlux calculated that each luminaire indirectly creates an average of 6.986 kilograms of CO₂ during its production and marketing to the point where it leaves the factory and is delivered on a company vehicle.
No matter how efficient the luminaire, and how effective the control system, a lighting installation still requires some electricity to operate. A 400 watt luminaire, for example, may create up to 41 tonnes of CO₂ due to the electricity used during its 20 year life. That is around 6,000 times the amount created during its production! A 250 watt metal halide garage forecourt floodlight operated on a 24 hour cycle will consume 2,500kWh of electricity and indirectly produce 0.9 tonnes of CO₂ per annum. Thorlux, being aware of its environmental responsibilities, has designed an in-house carbon offsetting scheme to enable the company itself and its customers to offset their carbon footprints.
The Thorlux carbon offsetting project
Thorlux has chosen to plant trees. Why trees? Trees and other plants absorb CO₂ during photosynthesis. The average tree can absorb around 1 tonne of CO₂ when grown to maturity. A forest covering many acres can effectively lock up CO₂, creating a ‘carbon sink’.
On 215 acres of land in Devauden, Monmouthshire, Thorlux (and the FW Thorpe Plc group) plans to plant enough trees to offset group emissions each year. 149,849 trees have been planted between 2009 and 2019.
Native broadleaf species will maximise the potential of the site, and link up adjoining ancient woodlands improving the local environment. Sustainable forest management will ensure that the trees thrive and are harvested at appropriate times to be used in wood-related products, ensuring that the carbon is held within the wood well past the life of the tree.
The scheme is the first site in Wales to be accredited to the Woodland Carbon Code, an independent standard devised by a group led by the Forestry Commission to certify woodland creation projects that are designed to measure and account for the capture and storage of carbon.
The voluntary code will encourage a consistent approach to woodland carbon projects, and offer clarity and transparency to customers about the carbon savings that their contributions may realistically achieve. www.woodlandcarboncode.org.uk/.
How can you help?
Most importantly, you should first minimise your carbon footprint. Plan your lighting scheme using the most energy efficient solution that is practical for your application. Use automatic controls that take advantage of daylight ingress and use presence detection. Such controls offer the added benefit of extended lamp life.
You should also consider the effect on the environment of producing the luminaires. Thorlux luminaires have a negligible effect on the environment during their production as the CO₂ per luminaire is offset by Thorlux and the manufacturing environment is certified ISO 14001.
You can help compensate for your carbon footprint through the Thorlux carbon offsetting scheme. If you, our customer, join the scheme, the impact will be far greater than Thorlux can achieve alone and, by planting your trees through the Thorlux scheme, you can be confident of achieving the maximum benefit - our project is managed by experts to ensure a sustainable forest.
Tree planting is an effective approach to carbon offsetting. A typical school sports hall using 25 4 x 54W T5 luminaires can be carbon offset (made carbon neutral) by ensuring 10 trees will grow to maturity.
It costs £7.50 to offset 1 tonne of CO₂ which includes the planning, tree planting and long-term maintenance. A typical sports hall installation would cost only £22.50 per year to offset (price correct February 2014).
Approximately 1 tonne of CO₂ will be sequestered by ensuring 1 tree grows to maturity. To reach maturity more than one tree will be initially planted. 1 tonne of CO₂ equates to approximately 2,630kWh of electricity.
To calculate the number of tonnes to offset each year, divide the annual energy consumption of your installation (in kWh) by 2,630. For example, if an installation uses 13,000kWh per annum, you need to offset 5 tonnes (5 x Cat. No. TR 14001). If you want to offset for five years, you need to purchase 25 x TR 14001.
Alternatively you can use our online energy calculator to determine your CO₂ emissions from Thorlux luminaires, a report will be generated in PDF format.
Why is CO₂ reduction so important?
In the greenhouse effect, the surface of the earth absorbs heat from the sun, re-emitting it as infrared radiation. This infrared radiation is absorbed by CO₂ water, ozone, methane and chloro-fluorocarbons (CFCs) and radiated back to earth.
An unnatural increase in greenhouse gases may therefore raise global temperatures and could cause climate change with such resulting phenomena as adverse weather patterns, the melting of polar ice caps and rising sea levels.
CO₂ is identified by the Intergovernmental Panel on Climate Change (IPCC) in their 2007 report “Climate Change 2007: Synthesis Report”, as the single biggest contributor to climate change.
What species of tree will Thorlux plant?
We will plant native broadleaf species - oak, hornbeam, birch, willow and wild cherry. The faster growing trees will be harvested (to FSC guidelines) to allow room for the slower growing species to mature.
Why native broadleaf trees?
Some non-native species can absorb greater levels of CO₂ however they will have a negative effect on local wildlife. Native species will improve the natural environment and provide a habitat for indigenous natural wildlife.
Isn’t there enough woodland in the UK?
The UK was approximately 98% forest before man settled. At the start of the 1900’s most of the forest had gone; only 5% of the UK was forest. Now, at the beginning of the 21st century, this figure is back up to 12%, but only 2% of the UK is covered in native species, the remainder being covered in fast growing conifers for the timber trade. Much of the UK’s indigenous wildlife is unable to survive in these conifer forests, hence the importance of increasing the coverage of native trees.
May I visit the site and see my trees?
Yes, you are welcome to visit. You will receive an Email detailing what you have purchased and the location of the site. The site will be open with free access all year round. Later, we plan to develop visitor facilities.
How did Thorlux calculate its carbon footprint?
To quantify Thorlux’s carbon footprint, we measured all electricity, gas and fuel used (including by company owned vehicles but excluding sub-contractors’ activities) in our UK factory and selling activities. We multiplied these quantities by factors provided by the Department for Environment, Food and Rural Affairs (DEFRA) in its ‘Draft Code of Best Practice for Carbon Offset Providers - February 2008’ to estimate the total CO₂ produced.
By dividing the total. CO₂ produced by the number of luminaires that Thorlux produces each year, we calculated that each luminaire creates an average of 6.986kg CO₂ in its production and delivery.
How do I calculate my carbon footprint?
1. Calculate your electricity consumption:
Find the circuit wattage for your luminaire and multiply this figure by the number of luminaires on the lighting circuit. Divide the wattage of your lighting circuit by 1000 to convert in to kW. Multiply the kW of your lighting circuit by the number of hours that the luminaires will be on for the year to find the total electricity consumption in kWh per year.
2. Convert kWh into CO₂ produced:
Government figures provided by DEFRA show that 0.38kg of CO₂ is produced for every 1kWh of electricity consumed. Therefore, multiply annual electricity consumption (kWh) by 0.38kg to calculate the CO₂ produced per year.
How do trees offset CO₂?
Trees absorb CO₂ during photosynthesis. (Trees and other plants use CO₂ and water in the presence of light to produce energy-containing carbohydrates.) The CO₂ remains in the tree until it dies and decomposes. Through sustainable management, trees can be harvested and used in wood products, therefore trapping the CO₂ and not releasing it back into the atmosphere.
How do I calculate how many trees will I need to plant?
It may be necessary to plant as many as 5 trees to achieve one tonne of sequestration due to forestry management requirements. Conditions will be monitored and adjusted as required by the silviculturalist and the Woodland Carbon Code. Each tree that grows to maturity will absorb approximately 1 tonne (1000kg) of CO₂ over 100 years. (The ‘US Department of Energy Report on Greenhouse Gasses 1998’ determined that a tree can absorb 1121kg CO₂ in 100 years). 1 tonne of CO₂ equates to approximately 2,630kWh of electricity (0.38kg per kWh). Divide your total carbon footprint (kg CO₂) for a year by 1000 to provide the total number of trees required that year. Alternatively, divide your energy use in kWhs by 2.630.
Will offsetting reverse climate change?
Carbon offsetting alone is not a cure for climate change. The most effective action you can take is to reduce your emissions. However, carbon offsetting can help reduce the impact of our energy consumption, and it makes us think more carefully about our effect on the environment. What is ISO 14001?
ISO 14001 is an internationally accepted standard that sets out a framework of essential elements for putting an effective environmental management system in place.
An environmental management system allows an organisation to consistently control its impact on the environment, reduce the risk of pollution incidents, ensure compliance with environmental legislation, and continually improve business operations.
ISO 14001 addresses the delicate balance between maintaining profitability and reducing environmental impact.
How can Thorlux controls save up to 70% electricity?
The Thorlux Smart System uses presence detection and daylight dimming to control light levels. Lights turn off when an area is vacant. When the lights are switched on, the light levels adjust automatically to combine with available natural light. Measurements have proven significant energy savings, depending on natural light ingress and presence frequency.
What is the FSC (Forest Stewardship Council)?
The FSC is an international organisation to promote responsible management of the world’s woodlands. For further information, see www.ic.fsc.org.
What is the Forestry Commission?
The Forestry Commission is a government department established for the protection and expansion of Britain’s woodland. For further information, see www.woodlandcarboncode.org.uk/.
What is the Woodland Carbon Code?
The Thorlux Woodland project is the first site in Wales to gain approval with the Woodland Carbon Code, a voluntary standard for woodland creation projects in the UK to monitor and assess claims about the CO₂ sequestered. See www.woodlandcarboncode.org.uk/.